65#High Cone and Dome
Specification: Cone-207.5mm
Dome-209mm
Thickness: 0.28mm~0.36mm
Height：18.5mm
Deformation pressure: ≥1.4mPa
Brusting pressure：≥1.6mPa
Plain or inner lacquer
This 65# high cone& dome, is used for diameter 65mm neck-in aerosol can. It can make the internal coating to prevent tank and insoluble substance caused by direct contact with the corrosion leakage.
65 white coated top and bottom cover
Specification: Cone-207.5mm
Dome-209mm
Thickness: 0.28mm~0.36mm
Height:13.5mm
Deformation pressure: ≥1.4mPa
Brusting pressure：≥1.6mPa
Plain or inner lacquer
This 65# short cone& dome,white coating surface, is used for diameter 65mm neck-in aerosol can. It can make the internal coating to prevent tank and insoluble substance caused by direct contact with the corrosion leakage.
52# Cone
Specification: Cone-200mm
Dome-200mm
Thickness: 0.25mm~0.36mm
Height:8.8mm
Deformation pressure: ≥1.3mPa
Brusting pressure：≥1.5mPa
Plain or inner lacquer
This 52# cone& dome, is used for diameter 65mm neck-in aerosol can. It can make the internal coating to prevent tank and insoluble substance caused by direct contact with the corrosion leakage.
65 top-bottom cover
Specification: for 65mm neck-in or straight-body cans
Thickness: 0.28mm~0.36mm
Height: short cone with 13.5mm, high or fat cone with 18.5mm
Deformation pressure: ≥1.4mPa
Brusting pressure：≥1.6mPa
Plain or inner lacquer
This 65# cone& dome series, is used for diameter 65mm neck-in or straight-body aerosol can. It can make the internal coating to prevent tank and insoluble substance caused by direct contact with the corrosion leakage.
65 Short
Specification: Cone-207.5mm
Dome-209mm
Thickness: 0.28mm~0.36mm
Height:13.5mm
Deformation pressure: ≥1.4mPa
Brusting pressure：≥1.6mPa
Plain or inner lacquer
This 65# short cone& dome, is used for diameter 65mm neck-in aerosol can. It can make the internal coating to prevent tank and insoluble substance caused by direct contact with the corrosion leakage.
45 coated top and bottom cover 2
Specification:Dia 45mm cone&dome
Thickness: 0.25mm~0.36mm
Height:5.5mm
Deformation pressure: ≥1.4mPa
Brusting pressure：≥1.6mPa
Plain or inner lacquer
This 45# cone& dome, is used for diameter 45mm neck-in aerosol can. It can make the internal coating to prevent tank and insoluble substance caused by direct contact with the corrosion leakage. Advantage: it can contain small volume lique or air, normally used for body perfume and etc..
简体中文
ENGLISH